TRL CMNS

FURMATS offer Burnt Magnesia-Chrome Brick including TRL CMNS for Back up lining of ladle, AOD ,LD Converter and Non-ferrous Industry

PRODUCT DESCRIPTION

Burnt Magnesia-Chrome Brick

APPLICATION

Back up lining of ladle, AOD ,LD Converter and Non-ferrous Industry

CONTROL PROPERTIES

CONTROL PROPERTIES
CONTROL PROPERTIES
CHEMICAL ANALYSIS (Calcined Basis)	UNIT by wt.	VALUE		TEST METHOD
CHEMICAL ANALYSIS (Calcined Basis)	UNIT by wt.	Typical	Limit	TEST METHOD
Cr₂O₃	%	14.7	≥ 10.0
MgO	%	45.1	≥ 40.0	By XRF
PHYSICAL PROPERTIES	UNIT	VALUE		TEST METHOD
PHYSICAL PROPERTIES	UNIT	Typical	Limit	TEST METHOD
Bulk Density	gm/cc	2.8		ISO 5017: 1998
App. porosity	Vol.%	19.8	≤ 22.0	ISO 5017: 1998
CCS	kg/cm²	365	≥ 300	ISO 10059-2:2003
RUL (t_a) at 2 kg/cm²	^oC	1630	≥ 1600	IS 1528- Part 2
SUPPLEMENTARY PROPERTIES (FOR INFORMATION ONLY)
SUPPLEMENTARY PROPERTIES (FOR INFORMATION ONLY)
PLC at 1600°C/2hrs	%	0.12	–	ISO 2478:1987
Control Dimensions		AQL 6.5% for critical dimensions (ISO 5022)
Shelf Life		12 months from the date of manufacture when stored under shed and free from moisture

Note: 1) The typical technical data shown are based on average results on production samples and are subjected to normal variation on individual tests. Hence, it cannot be taken as specification.

2) The above specification is valid for solid pressed standard items only. For shaped items and weight more than 20Kg may have a variation of 10%.

Disposal Consideration: May be disposed in an approved landfill unless contaminated in service. If contaminated with hazardous materials, place waste in suitable container. Seal and properly label the waste container. Send the container to an approved Transportation, Storage and Disposal (TDS) facility via an approved waste hauler. Be sure manifests have been completed and an adequate “Paper trial” has been established.