jm 2600 mortar

Blakite JM 2600 Blakite V JM 3300 Mortar Image

Description

JM 2600 :- This is an air-setting cement developed for use in lower temperature applications, where a high strength bond is required. It is recommended for mortaring insulating firebricks for operating temperatures up to 1430°C and can be used for both trowelled and dipped joints.

Murugappa Morgan Thermal Ceramics refractory mortars are normally supplied as ready-to-use wet blends of finely-ground aggregates and special binders. They develop good strength on air drying, forming strong joints and conferring an almost monolithic structure to the brickwork.

TYPE

Refractory air-setting mortars.

APPLICATIONS

  • For laying insulating firebricks, super-duty and high alumina dense refractory bricks
  • Provide resistance to infiltration of air or hot gases
  • Hobby and laboratory kilns
  • Retard penetration of slag and molten metal into the joints

FEATURES

  • Good workability, ideal plasticity and water retention
  • Low drying and firing shrinkages
  • High refractoriness
  • High bonding strength
  • Good resistance to chemical attack
  • Stability of chemical components

CLASSIFICATION TEMPERATURE

1430°C

FURMATS offer JM 2600 Mortar from MMTCL. Morgan Thermal Ceramics refractory mortars are normally supplied as ready-to-use wet blends of finely ground aggregates and special binders. They develop good strength on air drying, forming strong joints and conferring an almost monolithic structure to the brickwork.

MAJOR PROPERTIES

JM 2600 MORTAR
  
ClassificationMedium Duty
Temperature Limit (normal oxidizing conditions) (°C)1430
  
  
PROPERTIES MEASURED AT AMBIENT CONDITIONS (23°C / 50% RH)
  
Density (as applied) (kg/m3)1700
Viscosity “for guidance” (mm)30
Modulus of rupture (dried at 100°C) (Mpa)12
  
  
HIGH TEMERATURE PERFORMANCE
  
Permanent Linear change when dried (%)-3
Refractories (ASTM C-24-84) (PCE)23
  
  
CHEMICAL COMPOSITION (%)
  
Al2O333.4
SiO260.7
Fe2O31.3
TiO21.2
CaO + MgO0.3
K2O + Na2O2.8

The values given herein are typical values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
They are supplied as a technical service and are subject to change without notice. Therefore, the data contained herein should not be used for specification purposes.
Check with your Thermal Ceramics office to obtain current information

Furmats for over 3 decades, has been serving the Steel Industry by host of products including supply of best quality Ferro Alloys. Our operations HO in New Delhi, covers several markets with our team putting constant endeavors to reach the clients for their Ferro Alloys needs in numerous industrial clusters including Ghaziabad, Kanpur, Sahibabad, Meerut (UP or Uttar Pradesh), Mandigobindgarh, Ludhiana, Jalandhar (Punjab), Baddhi, Kaleamb (HP or Himachal Pradesh), Ahmedabad, Rajkot, Surat, Baroda (Gujarat), Gwalior, Indore (MP or Madhya Pradesh), Raipur, Raigarh (Chattisgarh), Sonipat, Hissar, Faridabad (Haryana), J&K, Assam, Meghalya, Bhiwadi, Jaipur, Kota, Ajmer (Rajasthan), Kolkata, Durgapur, Asansol (West Bengal), Jharsuguda, Angul, Cuttack, Jajpur, Rourkela (Odisha), Vizag (Andhra Pradesh), Coimbatore, Chennai (Tamil Nadu), Mumbai, Pune, Nagpur (Maharashtra), Haridwar, Kashipur (Uttrakhand)…..

Likewise our team is forwarding timely offers for Exports for requirements in other part of the world including Africa (Nigeria), Europe, Bangladesh, Nepal, Bhutan..